Large moisture barrier bag ESD 380x420 mm(WHS-B)

Large moisture barrier bag ESD 380x420 mm(WHS-B)

Product description

The moisture barrier material has a moisture transmission rate which is sufficiently small to permit storage of semiconductor wafers within the volume for an extended period of time without damaging the wafers by moisture attack.

Increase shelf life of your wafer storage?
It is recommended that they are stored at temperature between 18°C and 24°C, relative humidity of less than 30%, and in clean, dry, inert atmosphere (e.g. Nitrogen), and in a vacuum sealed bag.

Block bottom moisture barrier bags
Our bags can be custom-folded. The flat bottom reduces the risk of product being trapped in creases and folds, that may happen with gusseted bags.

The WHS brand offers a standardized range of moisture barrier bags and LDPE bags. These are used to prevent contamination during shipping and storage. This enables SPS to offer Moisture Barrier Bags with a negligible minimum order quantity.

Below you find the selection of products that have been tested with our Moisture barrier bags.

  • Wafer Canister - 8"
  • Wafer Canister - 6" Outside Base Size: 225 mm x 225 mm
  • Clamshell Single Wafer Shipper - 8"
  • Wafer Flex Frame Canister - 6"
  • Wafer Shipping Box - 2,5" up to 6"
  • Wafer Standard Canister 8"
  • Wafer Jars 8"
  • Wafer Jars 6" Internal: 167 mm diameter - height 76 mm 

 

Large moisture barrier bag ESD 380x420 mm(WHS-B)

Creates a safe micro-environment for long-term storage and shipment
Available from stock
Low minimum order quantities

Specifications

Product Number
WHS-B-2004
Material
0,15 mm PET (12 µm), AI (7 µm), NY (15 µm) & PE (115 µm)
Size
380 x 420 mm
ESD SAFE
ESD Safe
Status
Request information